Samsung Galaxy M22 M225F UFS ISP PinOUT | Test Point
Do you have problems unlocking the FRP lock on your Samsung Galaxy M22 M225F or flashing the device? In this situation, the Samsung Galaxy M22 M225F UFS ISP Pinout could be helpful. In certain situations, you can run into problems if you try to use your tools to remove locks, flash stock firmware, or get beyond factory reset protection.
This pinout may be used to write a UFS dump, erase the MDM lock, and perform a FRP reset on the Samsung Galaxy M22 M225F user lock. Here is where you can get the Samsung Galaxy M22 M225F UFS ISP Pinout and usage instructions.
You can easily obtain the Samsung Galaxy M22 M225F’s UFS ISP Pinout connection by following the detailed tutorial and images provided below. You can utilize the ISP Pinout with EasyJTAG Plus Box or any other tool to reset user data on your device or get over the FRP lock. View the guide by clicking the link below.
What is Samsung Galaxy M22 M225F UFS ISP Pinout?
The Universal Flash Storage In-System Programming PinOUT is referred to as UFS ISP PinOUT. Direct access to the flash memory of the gadget is made possible by a series of pins on the circuit board. By connecting to these pins, technicians and experienced users can directly communicate with the device’s storage system without using the standard software interfaces.
Repair for Samsung Galaxy M22 M225F Remove the FRP lock, flash, dead boot, and use any brand of phone.The only box that supports UFS is EasyJTAG Plus. After flashing the incorrect firmware and failing to boot, certain phones require those boxes. It would be nice if you had those crates for repairing boots. Certain brands cannot have their pin, pattern, password, FRP, or MDM locks removed. This can be used to remove locks.
Samsung Galaxy M22 M225F UFS ISP Pinout Image
- First, remove the back cover from your phone. Next, take out the motherboard’s camera, fingerprint reader, and battery.
- Take off the screws holding the motherboard in place, take it out carefully, and store it somewhere secure.
- Locate the device’s eMMC’s TxOp, TxOn, RxOp, and RxOn pins. To reach them, you might need to make a cut in the steel cover.
- Remove the adapter from the UFI box after obtaining it. The adapter’s pins ought to match those mentioned in the previous step.
- Use jumpers to link the four pins (TxOp, TxOn, RxOp, and RxOn) between the base and the adaptor. Allow the VCC and VCCQ to be powered by the USB.
- After inserting the connector, attach the UFI box to your computer.
- Reconnect the PC and batteries. Next, use the USB connection to connect the phone to your computer.
Required:
Read More:- Xiaomi Redmi 9C ISP EMMC PinOUT | Test Point
- Samsung Galaxy M22 M225F with Good Charge Battery.
- Simple Jtag box with micro USB cable converter for laptops or computers.
FRP Lock for Samsung Galaxy M22 M225F Using JTAG Plus Easy:
- Take off the back panel of the device and attach the wire to the UFS ISP Pinout.
- Next, attach the EasyJTAG Plus box to the appropriate UFS ISP Pinout.
- Examine the “UFS” tab.
- Next, select “Identify UFS Chip.”
- Use a USB cable to connect your Samsung Galaxy M22 M225F to the computer.
- Select Persistent from the Preset menu, then click Erase LUN0 Data.
